FPV dronas BetaFPV Pavo Pico II PNP SBUS

Trumpai apie prekę

Prekė: FPV dronas BetaFPV Pavo Pico II PNP SBUS. Kategorija: Dronai ir multikopteriai.

• Gamintojas: BetaFPV
• Modelis: Pavo Pico II

• Manufacturer: BetaFPV
• Barcode (EAN): 738170353212

"FPV DRONE BETAFPV PAVO PICO II PNP SBUS" - description

Maximum performance in the compact version of PNPBETAFPV Pavo Pico II PNP SBUS is a lightweight cinewhoop FPV drone, prepared as a compact platform for your own video system configuration. The 80 mm wheelbase design combines the mobility of a micro drone with high expansion flexibility, making it suitable for freestyle flights and creating smooth shots at close range. The PNP/SBUS version weighs about 39,1 g without battery and VTX module, so it allows pilots to independently select the image transmission system according to their requirements.

The new Pavo Pico II rigid frame has been redesigned for greater rigidity, simpler installation and more convenient service during everyday use. The design uses guided mounting points, embedded nuts and a 4-bolt attachment, which makes it easy to fold and helps maintain the correct fitting of the components. The carbon plate has been prepared for DJI O4 Air Unit and DJI O4 Air Unit Pro, thanks to which the platform allows you to create various FPV configurations.

The ready base for DJI O4 and O4 ProPavo Pico II in PNP version has been prepared for users who want to create their own FPV set with a selected image transmission system. The frame and mounting plate allow you to use the DJI O4 Air Unit or DJI O4 Air Unit Pro, allowing you to build a lightweight kit with HD digital image transmission. The PNP version does not include the VTX module, so it gives you the ability to individually adjust the configuration to your needs.

The F4 2-3S 20A AIO controller in the SBUS versionThe heart of the design is the F4 2-3S 20A AIO FC flight controller designed to work with the HD VTX digital system. The system has an integrated ESC 20A, 9V 2A power supply for HD VTX system and 5V 3A for external devices. The PNP/SBUS version is designed to work with the DJI SBUS protocol, making it suitable for pilots using compatible DJI controllers. Dedicated HD VTX 6-pin connector facilitates the installation of FPV system components.

The LAVA 1102 drive and lightweight design of the Pavo Pico II uses LAVA 1102 14000KV engines and Gemfan 45 mm 3-Blade propellers to create a set focused on strong thrust, fast response and efficient operation. The manufacturer indicates a 10% increase in power compared to the previous configuration, which translates into dynamic acceleration and good control during flight. After retrofitting with an appropriate video system and battery, the drone can act as a light cinewhoop for FPV, freestyle and recordings in small spaces.

The set includes plates and mounting brackets for O4 Air Unit and O4 Air Unit Pro, VTX 5.8G antennas, shock absorber balls, washers and a set of screws. Such equipment facilitates the preparation of the structure for the digital HD video system and reduces the need to select additional mounting elements. The PNP version does not include the VTX module, so the user can choose the target image transmission system himself.

The BETAFPV Pavo Pico II PNP SBUS kit includes the mounting hardware needed to prepare your own FPV setup with the DJI O4 Air Unit or DJI O4 Air Unit Pro system.

- 1 × BETAFPV Pavo Pico II Brushless Whoop Quadcopter

- 1 × top plate for O4 Air Unit Bracket II

- 1 × bottom plate for O4 Air Unit Bracket II

- 1 × O4 Air Unit Pro Bracket

- 4 × GF 45 mm 3-Blade propellers

- 1 × Type-C to SH1.0 adapter

- 1 × SH1.0-4Pin adapter cable

- 6 × shock-absorbing balls for O4 Air Unit Pro Bracket 6,6 mm

- 6 × shock-absorbing balls for O4 Air Unit Bracket II 8,8 mm

- 6 × shock pads for O4 Air Unit Bracket II 1,5 mm

- 6 × M2×10 Allen Cylindrical Head Screws

- 6 × M2×4 flat Allen head screws

- 6 × M2×4 self-tapping screws with Allen head

- 8 × M1.4×6 self-tapping screws with flat Phillips head and washer

- 2 × VTX 5.8G antenna

- 1 × VTX 5.8G antenna holder

- 1 × Phillips screwdriver

- 1 × Allen screwdriver H1.5

Note: The PNP version does not include the VTX module included.

Technical specification

Parameter Details ProductBETAFPV Pavo Pico II Brushless Whoop Quadcopter VersionPNP / SBUS Type Brushless FPV drone type whoop / cinewhoop PNP ColorBlack Wheelbase80 mm MasaOk. 39,1 g — PNP version without battery and VTX RamaPavo Pico II Brushless Whoop Frame Compatibility VTXDJI O4 Air Unit,DJI O4 Air Unit Pro VTX IncludedNo Receiver / Control ProtocolDJI SBUS Flight ControllerF4 2-3S 20A AIO FC MCU ControllerSTM32F405RGT6 168 MHz ESCZIntegrated 20A,input 2-3S Peak current ESC25A Firmware ESCBluejay BB51 BEC9V 2A for HD VTX,5V 3A for external devices HD VTX6-pin connector MotorsLAVA 1102 Brushless Motor KV motors14000KV PropellerGF 45 mm 3-Blade Battery connectorXT30 Battery slot16 × 12,7 mm Recommended batteryLAVA II 2S 580 mAh / 680 mAh,LAVA 2S 550 mAh, LAVA 2S 450 mAh Flight timeUp to approx. 6 min 30 s in O4 configuration with LAVA 2S 550 mAh battery String-to-weight ratio6,35:1 in O4 configuration Supported video systemDJI O4 Air Unit / DJI O4 Air Unit Pro after retrofitting PurposeFlights FPV, freestyle, cinewhoop, own HD VTX configurations, recordings in small spaces

Specifications