Domkratas 2T 265-365MM KD3180 KRAFT&DELE

Trumpai apie prekę

Prekė: Domkratas 2T 265-365MM KD3180 KRAFT&DELE. Kategorija: Darbo ožiai.

• Gamintojas: Kraft&Dele
• Modelis: KD3180

Steel workshop supports designed to support the vehicle during service, repair and maintenance work. The KD3180 from KRAFT&DELE is available in a set of two – which is a complete equipment for the safe lifting of one axle of the vehicle.

Lifting capacity 2 T (per piece) Height range 265 – 365 mm 3-stage adjustment Weight (pcs. ) 4,3 kg

Product characteristics

Load-resistant steel construction

The body is made of steel resistant to mechanical deformation and workshop chemistry – oils, operating fluids and cleaning agents. The material ensures durability with regular use in garage and workshop conditions.

3-legged base with washers

The three-point ground support eliminates the risk of the support swaying under load. Internal pads at the ends of the legs increase the contact surface with the ground, which limits the tendency to dig into soft surfaces, e.g. asphalt at high temperatures.

3-stage height adjustment

The range of 265 – 365 mm allows you to adjust the height of the support to the ground clearance of a specific vehicle. Three adjustment positions allow quick positioning without the need for precise positioning – just select the right hole and secure with a pin.

Bar safety pin

The metal pin locks the adjustment bar in the selected position, preventing it from accidentally slipping out under load. This is a key safety component – working under a vehicle without such protection involves serious risks.

Technical specification

Model KD3180 Brand KRAFT&DELE Lifting capacity 2 T Height adjustment range 265 – 365 mm Number of adjustment positions 3 Number of base legs 3 Bar protection Pin Material Steel Weight 4,3 kg (piece) Set contents 2 x car cradle KD3180

Application

Car jacks are always used as an additional protection after lifting the vehicle with a jack – you should never work under a car based solely on a hydraulic jack. Typical applications:

• Change of engine oil and filters
• Repair and replacement of the braking system
• Inspection and replacement of suspension components
• Exhaust system work
• Replacement of brake discs and pads
• Chassis and body inspection from the bottom
• Seasonal tyre and wheel changes
• Maintenance work in the backyard garage

Compatibility with the vehicle – what to look for

Before buying, you should check two parameters: the weight of the vehicle (each mare holds up to 2 T, a set of two pieces – up to 4 T in total with the support of one axle) and the ground clearance of the vehicle in the place of support points. The minimum working height is 265 mm, which corresponds to most passenger cars with standard bodywork. For vehicles with reduced suspension or very low ground clearance, it is recommended to measure the distance from the ground to the support point indicated by the vehicle manufacturer in advance.

Use and maintenance

After each use, the support should be cleaned of oil dirt and check the condition of the pin and adjustment bar. Moving parts should be periodically lubricated to prevent corrosion and maintain smooth adjustment. Store in a dry place — prolonged exposure to moisture can lead to surface corrosion of steel.

During operation, always make sure that the vehicle is standing on an even, hard ground, the mare are set at the support points designated by the vehicle manufacturer (so-called. jack points), and the pin is properly seated before entering the vehicle.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Kraft&Dele
Parametry	Product weight with unit packaging	7 kg
Parametry	Manufacturer code	KD3180
Parametry	EAN (GTIN)	5903957010168