{"product_id":"dyzelinis-oro-sildytuvas-su-lcd-termostatu-30-kw","title":"Dyzelinis oro šildytuvas su LCD termostatu, 30 kW","description":"\u003ch2\u003eTrumpai apie prekę\u003c\/h2\u003e\u003cp\u003ePrekė: Dyzelinis oro šildytuvas su LCD termostatu, 30 kW. Kategorija: Oro šildytuvai.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGamintojas:\u003c\/strong\u003e RED TECHNIC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModelis:\u003c\/strong\u003e RTNGO0122\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e30 KW POWER | 850 M³\/H BLOWER | LCD THERMOSTAT | 36 L TANK\u003c\/h2\u003e\u003ch2\u003eModel: RTNGO0122\u003c\/h2\u003e\u003ch2\u003eThe oil heater allows you to heat your workshop, hall or warehouse and set the temperature you need with a thermostat. You use a 850 m³\/h blower, 36 l tank and construction on wheels. You prepare heating in the selected place, ensuring exhaust gases are discharged to the outside and adequate ventilation.\u003c\/h2\u003e\u003ch2\u003e⚫ COLD WORKSHOP? SET THE HEAT NEEDED\u003c\/h2\u003e\u003cp\u003e▪ You heat the workplace with \u003cb\u003e30 kW\u003c\/b\u003e and choose the temperature \u003cb\u003ethermostat\u003c\/b\u003e.\u003c\/p\u003e\u003cp\u003e▪ Thanks to the \u003cb\u003etransport wheels\u003c\/b\u003e you will move the device before the next start-up.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003e🔴 WHY CHOOSE OUR HEATER?\u003c\/h2\u003e\u003ch2\u003e🔻 YOU HEAT YOUR WORKSPACE\u003c\/h2\u003e\u003cp\u003eFor a workshop, warehouse or hall you gain 30 kW of heating power. The 850 m³\/h blower distributes heated air in the workplace. You choose the application to the conditions of the room and the possibility of exhaust gases.\u003c\/p\u003e\u003ch2\u003e🔻 YOU CHOOSE THE TEMPERATURE ON THE PANEL\u003c\/h2\u003e\u003cp\u003eThe built-in thermostat allows you to set the temperature you need. The knob and digital indications focus operation in one place. You can check the settings when preparing the device for work.\u003c\/p\u003e\u003ch2\u003e🔻 YOU MOVE THE EQUIPMENT ON WHEELS\u003c\/h2\u003e\u003cp\u003eThe wheels and transport handle make it easy to change the place of the heater setting. You roll it on the ground instead of carrying all the weight. Move the device after turning off and cooling.\u003c\/p\u003e\u003ch2\u003e🔴 WHY DOES THIS MODEL STAND OUT FROM THE REST?\u003c\/h2\u003e\u003ch2\u003e🔻 CONNECTION FOR EXHAUST GASES\u003c\/h2\u003e\u003cp\u003eThis model offers a chimney connection. You can prepare exhaust gas drainage to the outside, while maintaining installation and ventilation requirements.\u003c\/p\u003e\u003ch2\u003e🔻 FUEL LEVEL PREVIEW\u003c\/h2\u003e\u003cp\u003eThe indicator allows you to check the filling of the tank. It will be easier to assess the need to replenish fuel before starting the next stage of work.\u003c\/p\u003e\u003ch2\u003e🔻 TWO PERMITTED FUEL TYPES\u003c\/h2\u003e\u003cp\u003eYou can use diesel or light fuel oil. You choose one of two types of fuel designed for this device.\u003c\/p\u003e\u003ch2\u003e🔴 30 KW POWER FOR HEATING WORKSHOPS AND HALLS\u003c\/h2\u003e\u003cp\u003eThe oil heater provides \u003cb\u003e30 kW of heating power\u003c\/b\u003e, which you will use to raise the temperature in your workspace.\u003c\/p\u003e\u003cp\u003eThe device is designed for \u003cb\u003eheating workshops, warehouses and production halls\u003c\/b\u003e, as well as rooms during renovation and construction works.\u003c\/p\u003e\u003cp\u003eYou can apply them where you need an \u003cb\u003eadditional heat source for the duration of the order\u003c\/b\u003e. The built-in thermostat allows you to \u003cb\u003eset the ambient temperature you need\u003c\/b\u003e from the control panel.\u003c\/p\u003e\u003cp\u003eWhen choosing the workplace of the heater, ensure \u003cb\u003eexhaust gas drainage to the outside and adequate ventilation\u003c\/b\u003e.\u003c\/p\u003e\u003ch2\u003e🔴 850 M³\/H BLOWING FOR HEAT DISTRIBUTION\u003c\/h2\u003e\u003cp\u003eThe five-blade fan provides \u003cb\u003eair flow of 850 m³\/h\u003c\/b\u003e, supporting heat distribution in the heated space.\u003c\/p\u003e\u003cp\u003eThanks to the forced blowing \u003cb\u003ethe heated air is directed to the room\u003c\/b\u003e where you are doing your work. You can use the solution during \u003cb\u003eheating of the hall, workshop or warehouse\u003c\/b\u003e, choosing the place of setting for the interior layout.\u003c\/p\u003e\u003cp\u003eThe fan has a \u003cb\u003epower of 180 W\u003c\/b\u003e, and the device requires connection to a 230 V \/ 50 Hz network. The \u003cb\u003e240 mm\u003c\/b\u003e warm air outlet is located at the front of the heater, which makes it easier to recognize the direction of the blower when setting it.\u003c\/p\u003e\u003ch2\u003e⚫ TAKE CARE OF THE CONDITIONS FOR YOUR WORK\u003c\/h2\u003e\u003cp\u003ePrepare the workshop for the next order and set the \u003cb\u003eneeded temperature\u003c\/b\u003e. You operate the heating with the \u003cb\u003eknob and digital panel\u003c\/b\u003e.\u003c\/p\u003e\u003ch2\u003e🔴 TECHNICAL DATA\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHeating power: \u003cb\u003e30 kW\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eFan power: \u003cb\u003e180 W\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower supply: \u003cb\u003e230 V \/ 50 Hz\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eAirflow: \u003cb\u003e850 m³\/h\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eNumber of fan blades: \u003cb\u003e5\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel tank capacity: \u003cb\u003e36 l\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eAverage fuel consumption: \u003cb\u003e1,7 l\/h\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eType of fuel: \u003cb\u003eDiesel; light fuel oil\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eDegree of protection of the regulator: \u003cb\u003eIP44\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: \u003cb\u003e845 × 445 × 620 mm\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eDiameter of chimney connection: \u003cb\u003e100 mm\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eWarm air outlet diameter: \u003cb\u003e240 mm\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight of the device: \u003cb\u003e22,5 kg\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003e🔴 CONTENTS OF THE SET\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOil heater \u003cb\u003eRED Technic RTNGO0122\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003cli\u003eOriginal packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e⚫ CHOOSE HEATING BY SPECIFIC PARAMETERS\u003c\/h2\u003e\u003cp\u003eYou have at your disposal \u003cb\u003e30 kW of power\u003c\/b\u003e and \u003cb\u003e850 m³\/h of air flow\u003c\/b\u003e. You evaluate the suitability of the heater for your hall based on the numbers.\u003c\/p\u003e\u003ch2\u003e🔴 USE IN WORKSPACES AND MORE\u003c\/h2\u003e\u003cp\u003eYou can use the oil heater to \u003cb\u003eheat workshops, production halls and warehouses\u003c\/b\u003e where you need to raise the temperature during operation. It will also work well in \u003cb\u003econstruction and renovation works\u003c\/b\u003e, as an additional source of heat in the prepared rooms.\u003c\/p\u003e\u003cp\u003eYou can apply it in \u003cb\u003eeconomic buildings, greenhouses and tunnels\u003c\/b\u003e, adjusting the device setting to the conditions of the facility. The power of \u003cb\u003e30 kW and the 850 m³\/h\u003c\/b\u003e blower allow you to deliver heated air to the selected workspace.\u003c\/p\u003e\u003ch2\u003e🔴 THERMOSTAT WITH DIGITAL TEMPERATURE PREVIEW\u003c\/h2\u003e\u003cp\u003eThe built-in controller allows you to \u003cb\u003eselect the temperature needed in the workplace\u003c\/b\u003e using the knob on the side panel.\u003c\/p\u003e\u003cp\u003eTwo digital displays present \u003cb\u003eset temperature and ambient temperature\u003c\/b\u003e, so you can compare the setting with the current reading. All indications are side by side, which makes it easier to \u003cb\u003econtrol settings when operating the heater\u003c\/b\u003e.\u003c\/p\u003e\u003cp\u003eWhen you want to change the selected value, you use the \u003cb\u003econtrol knob located under the displays\u003c\/b\u003e. The panel focuses reading and adjustment in one place, giving you \u003cb\u003edirect access to heating control\u003c\/b\u003e.\u003c\/p\u003e\u003ch2\u003e🔴 36 L TANK WITH FUEL LEVEL INDICATOR\u003c\/h2\u003e\u003cp\u003eAt the bottom of the device there is a \u003cb\u003efuel tank with a capacity of 36 l\u003c\/b\u003e, integrated with the heater design.\u003c\/p\u003e\u003cp\u003eNext to the filler cap is a \u003cb\u003efuel level indicator\u003c\/b\u003e, which allows you to check the filling without unscrewing the closure. Before starting work, you can assess \u003cb\u003ethe need to replenish the stock\u003c\/b\u003e and include refueling when preparing the equipment.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ediesel and light fuel oil\u003c\/b\u003e are designed for power supply, so you have a choice between two approved fuel types. Refill the tank after turning off the device and \u003cb\u003eits complete cooling\u003c\/b\u003e.\u003c\/p\u003e\u003ch2\u003e🔴 WHEELS AND HANDLE FOR EASY CHANGE OF POSITION\u003c\/h2\u003e\u003cp\u003eThe construction is based on a \u003cb\u003eframe equipped with two transport wheels\u003c\/b\u003e, thanks to which you can roll the heater on the ground.\u003c\/p\u003e\u003cp\u003eThe rear handle provides \u003cb\u003ea place to grab and guide the device\u003c\/b\u003e when changing its setting. You don’t have to carry all the weight of your equipment when you’re preparing your \u003cb\u003enext heating station in a workshop or hall\u003c\/b\u003e.\u003c\/p\u003e\u003cp\u003eAfter rearrangement, the structure is supported by \u003cb\u003ewheels and a support leg of the frame\u003c\/b\u003e. Before you start moving, turn off the heater and wait for its elements to cool down \u003cb\u003e\u003c\/b\u003e.\u003c\/p\u003e\u003cp\u003eIn the new place, again provide \u003cb\u003econditions for proper exhaust and ventilation\u003c\/b\u003e.\u003c\/p\u003e\u003ch2\u003e⚫ HEATING TAILORED TO YOUR WORK\u003c\/h2\u003e\u003cp\u003e▪ For the workshop you choose \u003cb\u003e30 kW\u003c\/b\u003e, \u003cb\u003etemperature control\u003c\/b\u003e and construction on wheels.\u003c\/p\u003e\u003cp\u003e▪ You prepare \u003cb\u003eexhaust gas drainage\u003c\/b\u003e and ventilation and set the necessary heat.\u003c\/p\u003e\u003ch2\u003e⚫ FAQ\u003c\/h2\u003e\u003ch2\u003e▪ WHAT FUEL CAN BE USED?\u003c\/h2\u003e\u003cp\u003eThe heater is designed to be powered by diesel or light fuel oil. The tank has a capacity of 36 l.\u003c\/p\u003e\u003ch2\u003e▪ DOES THE OIL HEATER REQUIRE ELECTRICITY?\u003c\/h2\u003e\u003cp\u003eYes. The device requires connection to a 230 V \/ 50 Hz power supply. The fan power is 180 W.\u003c\/p\u003e\u003ch2\u003e▪ HOW TO SET THE TEMPERATURE?\u003c\/h2\u003e\u003cp\u003eThe built-in thermostat knob is used for adjustment. On the panel there are digital indications of set temperature and environment.\u003c\/p\u003e\u003ch2\u003e▪ CAN THE WORKSHOP OR WAREHOUSE BE HEATED?\u003c\/h2\u003e\u003cp\u003eYes, provided that the exhaust gases are properly discharged to the outside and adequate ventilation is provided. The chimney connection itself does not replace a complete exhaust system.\u003c\/p\u003e\u003ch2\u003e▪ WHAT IS INCLUDED IN THE SET?\u003c\/h2\u003e\u003cp\u003eThe kit includes an oil heater RED Technic RTNGO0122, user manual and original packaging.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGroup\u003c\/th\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003enew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eInvoice\u003c\/td\u003e\n\u003ctd\u003eWith a VAT invoice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eRED TECHNIC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eKind\u003c\/td\u003e\n\u003ctd\u003eoil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eHeating power\u003c\/td\u003e\n\u003ctd\u003e30 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eRTNGO0122\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eProduct weight with unit packaging\u003c\/td\u003e\n\u003ctd\u003e12.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eManufacturer code\u003c\/td\u003e\n\u003ctd\u003eRTNGO0122\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003ePackaging status\u003c\/td\u003e\n\u003ctd\u003eoriginal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eEnergy efficiency class\u003c\/td\u003e\n\u003ctd\u003eA++\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eRange of energy efficiency classes\u003c\/td\u003e\n\u003ctd\u003eA++ - G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"GTGARDEN","offers":[{"title":"Default Title","offer_id":50560466387004,"sku":"17869906701","price":297.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/2161\/6188\/files\/DIESEL-OIL-HEATER-BLOWER-THERMOSTAT-LCD-HEATER-FURNACE-30-KW.jpg?v=1790570601","url":"https:\/\/market365.lv\/products\/dyzelinis-oro-sildytuvas-su-lcd-termostatu-30-kw","provider":"Market365","version":"1.0","type":"link"}