Pristatymo terminas kiekvienai prekei nurodomas prie kainos bloko.
Pristatymas visoje Lietuvoje: nemokamas.
Trumpai apie prekę
Prekė: Belaidis prieigos taškas MikroTik cAP LTE12 ax, lubinis, cAPGi-5HaxD2HaxD&EG12-EA, AX1800. Kategorija: WiFi maršrutizatoriai ir prieigos taškai.
- Gamintojas: MikroTik
- Modelis: 601320575
- built-in LTE modem cat. 12 (600Mb/s downlink, 150Mb/s uplink)
- Operation in the 2,4 and 5 GHz bands simultaneously
- AX1800 WiFi speed, 574 Mbps in the 2,4GHz band and 1201 Mbps in the 5GHz band
- antennas with a gain of 5,5 dBi (5 GHz) and 6 dBi (2,4 GHz)
- double polarity (2x2 MIMO / dual chain) in both bands
- quad-core processor IPQ-6010 with a clock speed of 1.8 GHz
- 128 MB NAND memory and 1GB DDR3L RAM
- 2x gigabit Ethernet ports
- PoE input: 802.3af/at or passive
- PoE output on the second port - only passive up to 57V
- RouterOS system, Level 4 license
MikroTik cAP LTE12 ax, Ceiling AP (cAPGi-5HaxD2HaxD&EG12-EA) is the latest ceiling access point in the cAP, ceiling AP, MikroTika series. MikroTik cAP LTE12 ax is a device with fast, reliable mobile Internet and amazing Wi-Fi 6 coverage.
MikroTik cAP LTE12 ax is an efficient access point with a very aesthetic appearance for ceiling installation. In high-traffic areas, traditional access points can face numerous obstacles - devices can be knocked over, lost or even stolen.
cAP offers a simple yet effective solution: mounting the access point on the ceiling. This method of installation not only physically raises the device, but also ensures optimal signal distribution, minimizes interference caused by obstacles and reduces the risk of theft.
The MikroTik cAP LTE12 ax features a dual-band radio module that can operate simultaneously on the 2.4 GHz and 5 GHz bands, supporting the latest 802.11ax standard as well as older ones. The built-in antenna provides strong 360-degree coverage around the device, so you don't have to worry so much about device placement. Mounting it on the ceiling eliminates many signal absorption problems, such as signal blockage by large TVs, metal cabinet walls in open-plan offices, etc.
Thanks to Wi-Fi 6, you can fully utilize the potential of the fast 600 Mbps LTE CAT12 modem. Compared to previous generations, you get up to 40% higher speed in the 5 GHz band and up to 90% higher speed in the 2.4 GHz band.
In addition, Wi-Fi 6 offers significantly better energy efficiency and security. OWE/WPA3-PSK/WPA3-EAP encryption and management frame protection help prevent all kinds of attacks, such as brute-forcing and Deauthentication Attacks.
- 1, 3, 5, 7, 8, 20, 28, 38, 40, 41 and
- supports the function of band aggregation (carrier aggregation).
Access point cAP LTE12 ax is equipped with 2x Gigabit Ethernet ports (PoE-in and PoE-out), as well as a modern quad-core processor clocked at 1,8 GHz, 128MB of NAND memory and 1GB of RAM. Enough to take full advantage of the potential of RouterOS v7 network software. Complex firewall rules, IPsec hardware encryption, Wireguard, BGP, advanced routing or multiple VPN tunnels for remote work – cAP LTE12 ax can do it all. Compared to previous models, cAP LTE12 ax offers many enhanced authentication types: OWE, WPA3-PSK, WPA3-EAP and roaming 802.11r.
cAP LTE12 ax is also a great way to make it easier to install and maintain your office network, as it supports PoE-in and PoE-out. With just a few clicks in the latest central wifiwave2 CAPsMAN management system, you can easily set up hundreds of cAP ax devices. You can use all kinds of MikroTik devices to effortlessly run CAPsMAN.
The Generation6 802.11ax wireless standard provides up to 40% higher speed in the 5 GHz band and up to 90% higher speed in the 2,4 GHz band if compared to previous generations! But more important than speed is stability. The latest AX devices can withstand even the toughest wireless interference scenarios, offering the most stable and uninterrupted signal!
The LTE12 ax cAP access point also supports repeater mode, although it has two Gigabit Ethernet ports for expanding the network using cabling. The first port supports active PoE 802.3af/at, while the second port allows you to power other devices via passive PoE (up to 57V).
All necessary components such as ceiling mount, PoE adapter, power supply, screws and mounting pins are supplied.
- Processor: IPQ-6010
- Clocking: 1,8 GHz
- Number of cores: 4
- RAM: 1 GB
- Type of RAM: DDR3L
- Embedded memory: 128 MB NAND
- WiFi interface: QCN-5022 (2.4 GHz), QCN-5022 (5 GHz)
- Ethernet interface: 2x gigabit 10/100/1000 Mbps Ethernet ports
- Polarization: Double, in both bands 2x2 MIMO / dual chain
- Wireless transmission standards: 2.4 GHz: 802.11 b/g/n/ax, 5 GHz: 802.11 a/n/ac/ax
- Frequency range: 2412 - 2484 MHz, 5150 - 5875 MHz
- Antennas: 5,5 dBi (5 GHz) and 6 dBi (2,4 GHz) gain
- LTE category: 12 (600Mbps Downlink, 150Mbps Uplink
- LTE Modem: EG12-EA
- Slot SIM: 1x (Micro SIM)
- TAC: 86056104
- LTE FDD bands: 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) / 8 (900MHz) / 20 (800MHz) / 28 (700MHz)
- LTE TDD bands: 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz)
- Category 3G: R8 (42.2Mbps Downlink, 11.2Mbps Uplink)
- 3G bands: 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz)
- PoE input: Yes, 802.3af/at
- Input voltage range: 18-57 V (DC jack), 18-57 (PoE-In)
- Maximum power consumption: 33 W, 13 W (no load)
- PoE output: Passive PoE up to 57 V
- Power supply current: 0.95 A
- Power supply voltage: 48 V
- Smart PoE: Controller
- Max. output to port (input < 30 V): 0.6 A
- Max. output to port (input > 30 V): 0.4 A
- Max. output: 0.6 A
- Max. output power: 22.8 W
- Max. output current: 0.6 A
- Dimensions: 228 x 48 mm
- Admissible operating temperature: From -40 to 50°C
- Operating system: RouterOS v7
- License: Level 4
- Set composition: Device, 48 V 0.95 A power supply, Gigabit PoE injector, Mounting bracket for ceiling, Screw and mounting pins set
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With VAT invoice |
| Parametry | Manufacturer | MikroTik |
| Parametry | Mode of operation | Access Point |
| Parametry | Internal modem | 4G LTE |
| Parametry | LAN port operating standard | 10/100/1000 Mbps |
| Parametry | EAN (GTIN) | 5907949181447 |
| Parametry | Manufacturer code | 601320575 |
| Parametry | Model | 601320575 |
| Parametry | The highest standard supported | 802.11ax (Wi-Fi 6) |
| Parametry | Batteries included | no |
| Parametry | Wireless operation standard | 802.11ax (Wi-Fi 6),802.11ac (Wi-Fi 5),802.11n (Wi-Fi 4),802.11g,802.11b,802.11a |


